News
NEWS
Types and Design Considerations of Mechanical Parking Garages
Published Time:
2021-03-09
Three-dimensional parking refers to a new parking method that utilizes spatial resources for three-dimensional parking, saving land. The advantage of mechanical parking garages is that they can make full use of urban space, so they are called "energy savers" of urban space. I. Lifting and horizontal movement 1. Two-layer lifting and horizontal movement type: Two-layer lifting and horizontal movement mechanical parking garages are suitable for indoor and outdoor use.
Multi-story Parking This refers to a new parking method that utilizes spatial resources for multi-story parking, saving land. Mechanical Parking Garage The advantage is that it can make full use of urban space, so it is called the "energy saver" of urban space.
I. Lifting and Horizontal Movement
1. Two-layer Lifting and Horizontal Movement Type:
Two-layer lifting and horizontal movement mechanical parking garages are suitable for both indoor and outdoor use.
Parking spaces can be increased by more than 1.8 times.
Considering the possibility of simultaneous entry and exit, 3-6 trips are more reasonable.
The net height under the two-layer lifting horizontal beam should be greater than 3650 mm.
If high-roof vehicles need to be parked across the platform, more than 3950 mm is required.
2. Three-layer Lifting and Horizontal Movement Type:
Three-layer lifting and horizontal movement pit-type mechanical parking garages are suitable for both indoor and outdoor use.
Parking spaces can be increased by more than 2.8 times.
Considering the possibility of simultaneous entry and exit, 3-6 trips are more reasonable.
A lifting and horizontal movement mechanism with high space utilization
The net height under the three-layer lifting and horizontal movement shaft beam should be greater than 3600 mm.
Mechanical Parking Garage The net depth of the pit should exceed 2000 mm (more than 2100 mm for heavy-column types).
3. Four-layer Lifting and Horizontal Movement Cable Type:
Outdoor mechanical parking garages mostly use four-layer lifting and horizontal movement cable systems.
Parking spaces can be increased by more than 3.5 times.
Considering the possibility of simultaneous entry and exit, 3-6 trips are more reasonable.
Similar models include three-layer, five-layer, and six-layer lifting and horizontal movement steel cable systems.
The net height under the four-layer lifting and horizontal movement steel cable beam of the mechanical parking garage should be greater than 7200 mm.
The canopy has a drainage slope design.
II. Simple Lifting Types
1. Simple Lifting Type Mechanical Parking Garage (Key Exchange)
Mechanical Parking Garage The two-story simple lifting type is suitable for villas, hotels, residential areas, hospitals, etc.
Parking spaces can be doubled.
The net height under the two-story simple lifting beam should be greater than 2900 mm, which is very suitable for family buildings with lower floors.
2. Simple Lifting Pit Type
Two-story simple lifting pit type is suitable for both outdoor and indoor use.
Parking spaces can be doubled. No need to turn the key.
The net height under the two-story simple lifting shaft beam should be greater than 3450 mm, and the net height of the shaft is 2000 mm.
Mechanical Parking Garage There is no awning outdoors, meeting the needs of specific geographical locations.
Related News
Mobile Website
Service Hotline:400-108-5515
Email:huachenparking@163.com
Office Address: Room 601, Building 1, Zhexin Plaza, Dongfeng East Street, Weifang City
Address: South of Shanbeitou Village, Fangzi Economic Development Zone, Weifang City